3 Ways to Solve Water Leakage in Plastic Pipes

plastic pipes

PVC or other types of pipes are used in every industrial, commercial, and residential areas. Mostly, we have to install all sorts of pipes. Whether it’s PVC, UPVC, HDPE, PB, or other sewerage lines. Plastic is such a material that has now replaced the brass as well as steels in the water supply market. We have the verities of rigid and tough plastic materials to smoothest and soft products. That are installed in all homes and industries to fulfil almost multiple sorts of needs. Let’s not forget about the PPRC Pipes that are nowadays extremely essential. As they are one of the indispensable products of plastic pipe sector for indoor and hot water system. Not to mention that the PPRC-pipe is also used with light and hygienic structure due to its smooth-structure and easy-installation-procedure.

Let’s not forget that plastic manufactured pipes don’t just burst or start leaking the next day after you buy it. They are created to withstand hot and cold temperature. But even if they leak sometimes, it becomes a question of the day how to fix the leaking. In the most cases, you search for the plumbers – specially the ones who can do the job in cheap rates. But that cheap rate job can sometimes cause you more danger. And with more danger – more expenses arise. So, why not you take care of your plastic pipes for yourself? There can be only few but stronger guidelines to follow and you can easily recover or solve the issue as per your need. Still looking for the best ways to fix the leakages? Well, we have got your back!

1. Repair with Tape

This is the easiest and the cheapest method to fix the leakage of your plastic installed pipe in your home or industry. But as it is the cheapest, it is the foremost temporary solution to your problem.  Not that down, this method is only effective when you have only small leakages or fractures in your pipes. Because if there is a big hole, there will be a pressure that can’t be withstood by the tape. And at the end, your all efforts will go in vain.

So, checkout! First of all, you need to close the line so the tape doesn’t get wet and you can easily fix the leaking. Once, you have closed the wall or water connection to that pipeline, then the cleaning and drying procedure takes place. After that, search for the damage area and then start taping until it is completely covered. Make sure, there are no gaps left. And even if there are gaps left, you can start retaping for the stronger support. After you are done taping the pipes, start testing! Open the wall and run the water and find out whether it is still leaking or not! In 99.99% situations, you will get the perfect result – your leakage problem is solved.

2. Fix the leakage with Fiberglass Wrap

Once the taping didn’t work, we have still got you covered with another solution. A solution that is more effective and stronger but a little but costlier compared to the previous one. If your pipes are constantly leaking, and due to that you have a big hole in the pipeline. You can fix that covering it with the fiberglass wrap. It is wrapped on a longer scale compared to the taping size and effective enough to hold the pressure. But how to do the fiberglass wrapping to fix up the leakage solution?

Well, we still have the procedure for you to follow and get the leakage fixed in a jiffy. What you have got to do is simply block the water supply in that area. Once you have blocked the water supply then start cleaning and then wait for it to dry. As soon as the pipe is dried completely, which is an effective way to solve the draining. Then you can move forward to the wrapping the fiberglass around the leakage and seal it completely!

3. Use Repair Epoxy to fix the Leakage

Epoxy repair is a sealant used to repair and seal both tiny and major leaks. It is a strong glue capable of adhering to wood, concrete, and metal surfaces. It can repair cracks, holes, and other forms of damage. Before applying repair epoxy, the repair surface must be prepared. This involves cleaning, sanding, and eliminating any debris. After the space has been cleaned, the repair epoxy can be applied. Epoxy for repairs should be used in thin layers due to its rapid curing. It must be worked into the crevices and holes, then pressed into the surface. The area should be sanded to provide a smooth surface once the epoxy has hardened.

For instance, in the case of a leaking pipe joint, you would first clean the area and remove any debris. Then, you would press the repair epoxy into the cracks and crevices of the joint. The region is sanded to create a smooth surface after it has hardened. After completing this, the pipe joint should be entirely sealed and leak-free. In conclusion, a repair epoxy is a form of sealant used to patch and seal major and small breaches. It is applied in thin layers and should be pressed into cracks and crevices to establish a firm binding. The area should be sanded to provide a smooth surface after the epoxy has hardened.

Read More: How to Prevent Plumbing Problems in Your Home


Plastic pipe leaks are widespread in residential, commercial, and industrial locations. PVC and other lines are utilized in many applications. Due to their durability, flexibility, and affordability, plastic pipes are popular. Wear and can cause even the most robust plastic pipes to leak. Therefore, it’s crucial to know how to patch these leaks to avoid further damage. Tape, fiberglass wrap, and epoxy are the basic ways to fix leaking plastic pipes. Tape is the easiest and cheapest way to patch a tiny leak. Start by turning off the pipeline’s water feed. After that, wash and dry the area. Once the place is dry, locate the damage and tape it. Check for leaks after making sure there are no holes.

Fiberglass wrap works better for major leaks. Turning off the water supply and cleaning the area are crucial again. After the pipe is dry, wrap fiberglass around the leak and seal it. This procedure is more reliable and more expensive than tape. Repairing epoxy with a sealant is the last option. Cleaning and sanding the repair surface before applying epoxy is crucial. Apply small layers of epoxy and press it into cracks and crevices once the place is ready. After the epoxy hardens, massage the area to make it smooth.

In summary, there are three main solutions to fix leaking plastic pipes: Tape, fiberglass wrap, and epoxy are the three major ways to mend leaking plastic pipes. These procedures are simple and don’t require an expert. If the leak is significant, a plumber should be called to fix it.

Leave a Reply

Your email address will not be published. Required fields are marked *